Publicidad
Idiomas disponibles
Idiomas disponibles
correct Keycard.
• To program the Wi-Fi Bridge, start by pressing th
button „Add HomeTec Pro / component".
• It is imperative to keep the ABUS Keycard(s) in a
secure place even after completing the setup! If
you forget your password, you can reset and reassign
it by scanning the QR code. Do not give the Keycard
to third parties.
To guarantee proper function, we expressly
recommend performing updates in the app and
software/firmware updates for HomeTec Pro
components in a timely manner. The app will provide
information on this. You can also perform the
respective update in the component's settings.
Installation and LED signalling
Plug the Wi-Fi
bridge into a free
socket (230 V)
within a
maximum
distance of
5 metres from the
HomeTec Pro door
lock drive CFA3100.
14
The LED of the Wi-Fi bridge signals the following:
LED
LED
Description
colour
status
shining
Normal operating status
flashing
-
shining
Boot process
(further steps pending)
flashing
Boot process (in action)
shining
Search process for
updates/licences
flashing
Installation of updates/licences
shining
Network (Wi-Fi) search
flashing
Ready for network (Wi-Fi)
configuration
shining
-
flashing
Error/problem is present or
factory reset* has been started
* Perform a factory reset: Press the recessed button
on the underside of the Wi-Fi bridge with a pointed
object for approx. 10 seconds.
15
Publicidad
