Intellinet Network Solutions 561761 Instrucciones página 3

Instructions
grounding is typically provided by the metal frame of the mounting rack.
Connections
• All ports on the switch support Auto-MDI/MDI-X functionality, so you can
use straight or crossover UTP/STP cables to connect the RJ45 ports to
PCs, routers, hubs, other switches, etc. Cat5/5e/6 UTP/STP cables provide
optimal performance; if a status LED doesn't indicate a link or activity,
check the corresponding device for proper setup and operation.
• Use the included power cable to connect the receptacle on the back of
the switch to a power outlet, and confirm that the PWR LED lights.
• The LED indicators make it easier to monitor the switch and its connections.
NOTE: All RJ45 ports provide power to a connected device, and all connected
devices should comply with IEEE 802.3af/at.
№ LED
1 PWR
2 SYS
Link / ACT / Speed
3
1 – 24
4 PoE 1 – 24
5 25S – 28S
Color
Green
Blinking
Green
10/100M: Orange;
Blinking
1000M: Green
Yellow Blinking
1G: Orange;
Blinking
10G: Green
Status
On Unit is receiving power.
Off
Off
On Valid port connection.
Data transmitted/received.
Off
On The connected device is receiving power.
Abnormal power supply at the port.
Off No PD device is linked.
On Valid port connection.
Data transmitted/received.
Off
Description
Check connection.
System is normal.
System not started.
No link established.
No link established.
English
3