Publicidad
Idiomas disponibles
Idiomas disponibles
Battery Installation:
Insert two LR20 type batteries with the correct polarity.
Note: When the batteries are running low, the volume and
signal reception will become unstable.
IMPORTANT: Do not mix old batteries with new ones. When
the radio is not used for a long time, remove the batteries
to avoid damage caused by leakage and/or corrosion.
Connection to electrical current:
Insert the cable into the power socket (10) and connect it to the mains. When powered in this
way, the radio does not take battery power into account.
IMPORTANT: Always be careful when using electrical current and that it is 220V/50Hz.
Radio operation:
1. Turn on the Radio. Using the power button (3) select AM or FM
2. Search for stations. Use the station tuner (5) and check the frequency indicated in the
window (8) to get the desired station. The tuning light will turn bright when it finds a
radio station with a strong signal.
3. Adjust the volume. Use the volume control (6) by
rolling up the wheel to increase the volume.
4. Use of headphones. Insert a pair of headphones with
a 3.5mm Jack connection to the jack to be able to
listen to the audio that way.
Antenna use:
Raise and extend the antenna horizontally for optimal reception.
IMPORTANT:
1. Avoid dropping the radio on the ground.
2. Do not place the radio in a place that is in direct sunlight, or that is hot.
3. Do not use alcohol, thinner, or other strong detergents to clean it. Use a soft cloth with
detergent to clean the cabinet.
4. Do not use new and old batteries together. When the volume fades or distorts, please change
the batteries in time.
5. When you do not use the radio for a long time, please take out the batteries to avoid corrosion
of the radio parts.
6. Do not adjust the components of the radio, do not open it for any reason.
Publicidad
