geberit ESG LIGHT Manual De Operación página 17

Following information and instructions
WARNING
Risk of injury due to non-observance of the safety notes
Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
▶ Read and observe all safety notes, instructions,
illustrations and specifications provided with this power
tool.
▶ Store all safety notes and instructions for future reference.
Read through and observe the following documents before
commissioning:
• These operating instructions
• The accompanying 'General safety notes for power tools' document
Avoiding danger of fatal electric shock
The use of damaged electrofusion tools can lead to serious injuries or
death as a result of an electric shock.
• Only use the electrofusion tool if it is in perfect working order.
• Check the electrofusion tool for damage before each use.
• Provide mains fuse protection using a residual-current device.
Country-specific regulations must be observed in this respect.
• Do not weld wet or water-filled pipes.
• Do not immerse the electrofusion tool in water or other liquids. Dirty
machines can be cleaned using a damp cloth.
• Protect the electrofusion tool against moisture.
• Only connect the connecting cable for electrofusion coupling to the
electrofusion coupling or electrofusion tape once clean and dry
Geberit PE or Geberit Silent‑db20 pipes or fittings have been
inserted.
• Do not open the electrofusion tool. Only replace defective
connecting cables for electrofusion coupling with the corresponding
spare part from Geberit.
63050397048849803 © 02-2023
967.779.00.0(02)
EN
17