Operation; Before Using Your Unit - Powr-Flite Rigel Pro Manual De Instrucciones

OPERATION

Before Using Your Unit

For The First Time
Attaching the handle to the vacuum.
The vacuum cleaner and the handle are
packed separately.
1. After first removing the handle
screw, position the handle behind the
vacuum cleaner and level with the
top of the unit. Hold the power cord
down and away from the vacuum
while the handle is being attached.
Make sure that the switch on the
handle is positioned toward the front
of the vacuum cleaner.
2. On the bottom of the handle are two
"T-shaped" rails that slide forward
onto two guides located on the top
of the vacuum cleaner. Line up the
handle so that the "T" rails will slide
into the guides and push the handle
forward.
3. Insert the handle screw and tighten
securely.
4. Turn the upper cord storage hook
to the upright position and wind the
power cord around the cord storage
hooks when storing the vacuum
cleaner.
10