Publicidad
Idiomas disponibles
Idiomas disponibles
19. Powering Your PAP Machine Using An
(not included)
A.
Plug the AC power cord included with the PAP machine
into the AC outlet on a pure sine wave inverter.
B.
Plug the inverter into the DC output port found on the
battery. The inverter will convert DC power from the
battery to AC power required for the factory AC power
cord.
C.
Please note that using an inverter will draw more of your
battery power than just using a DC power cord.
D.
To ensure the integrity of your PAP machine, please check
with your PAP machine manufacturer regarding the type
of inverter to use. Most manufacturers recommend a pure
sine wave inverter as opposed to a modified sine wave
inverter.
20. PAP Machine Runtimes
EXP48PRO: 2-3 Nights
To get the most run time from the battery we recommend turning off
all auxiliary features such as humidifier and heated hose if possible.
These features use a large amount of amperage and will draw most of
the available power from the battery.
PAP machine nightly run times for the EXP48PRO and EXP96PRO
are figured using the average night sleep in the US of 7 hours and
with auxiliary features turned off. Power requirements will vary
greatly from one PAP machine to the next and with different
prescribed pressure settings. We recommend you test your PAP
machine with the battery prior to depending on it for emergency or
off-grid power use. Mask fit is also important. Air leakage will result
in higher power consumption and reduced run times.
EXP96PRO: 4-6 Nights
Inverter
Publicidad
