Descargar Imprimir esta página

Aigo R6933 Manual Del Usuario página 5

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 40
Basic operations
Power On/Off
Hold the power button for more than 5 seconds to turn on the device, the same way for 3 seconds to turn it off.
When the recording pen has no any operations and reaches the set shutdown time,
it will automatically save power and shut down.
Remark: This function is invalid when the recording pen is connected to PC or charged.
Charging
1.Charging through the adapter: Plugging the adapter into the power supply before charging, and then plugging
one end of the USB data cable into the adapter, the other end is connected to the USB interface of the recorder,
and the adapter can be charged. Under normal conditions, it can be fully charged in about 2 hours. Please use
a 5V/1000mA power adapter that complies with the national standard.
2. Charging via computer: Plugging one end of the standard USB cable into the USB port of your computer,
and plugging the other end into the USB port of your recorder. And at the same time, the voice recorder can be
used as a mobile disk.
(It takes longer to charge the recorder by using the USB interface of the computer than by using the adapter.)
Note:
1. When the system enters the low power state, it will prompt the low power and shut down automatically.
2. You can record while charging via the adapter. When charging with a computer,
you cannot record while charging.
3. If the recorder is not in use for a long time, please charge it every other month.
Connecting with PC
Connecting a computer can charge the voice recorder and operate the data of it. In the power-on state, connecting
the PC and the recorder with the USB cable provided randomly, and opening "My Computer" to prompt a
new "Removable Disk", Operating system: Windows XP/Mac OS 10 or above.
03

Publicidad

loading