LD Systems MON G3 Serie Manual De Usuario página 12

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS
The connection and control panels of the MON 8 A G3 to MON 15 A G3 active monitors are identical and
are located on the right-hand side of the corresponding enclosure.
2
1
POWER IN
1
Blue Power Twist mains input socket for the power supply of the active monitor (PowerCON compatible).
A suitable power cable is included.
POWER ON/OFF
2
On/off switch. Always switch on the monitor as the last unit in the signal chain and switch it off again
as the first unit.
POWER OUT
3
White Power Twist mains output socket for supplying power to additional active monitors
(PowerCON compatible). Ensure that the total power consumption of all devices connected to the
device does not exceed the given ampere (A) value.
INPUT 1 / 2
4
Balanced audio inputs of channels 1 and 2 with XLR/jack combo sockets.
The signals of the two channels are internally summed mono.
THRU 1 / 2
5
Line outputs 1 and 2 with male 3-pin XLR sockets (output signal = input signal).
LC DISPLAY
6
Multifunctional graphic LC display for showing the overall volume, the DSP preset and the input levels
for channels 1 and 2 in the main display. The menu items, sub-menu items and corresponding editing
options are displayed in the editing menu.
12
3
6
8
7
4
5
9