How to use
Product parts
Due to technological innovations, the product description in this manual may not completely match
your appliance. More detailed information corresponds to the final product.
1
2
4
5
7
Accesories
The following parts are optional for specific models. If your tumble dryer has the following parts, use glo-
ves to install them according to the instructions below.
Hose holder
Condensation drain hose
Connector
Model
Drying type
Product dimensions (height x width x depth)
Maximum load capacity (Kg)
Rated voltage and frequency
Ambient operating temperature
Net weight (Kg)
Power
Number of programmes
Note
The rated capacity is the maximum capacity of laundry that can be dried at one time. Make sure that
the laundry loaded in the product does not exceed the rated capacity.
Do not install the dryer in a room where there is a risk of frost. At temperatures close to freezing point, the
dryer may not work properly.
There is a risk of damage if condensed water is allowed to freeze in the pump, hoses and/or condensed
water container.
1
Power cable
3
2
Top cover
3
Control panel
4
Water tank
5
Drum
6
6
Door
7
Door filter
8
Air inlet
8
9
Filter in base
9
10
10 Protective cover
SD-8NDP
Condenser
845 x 595 x 615mm
8
220-240V ~ 50Hz
5ºC ~ 35ºC
41
2700W
9
37
English
infiniton.es