Publicidad
Idiomas disponibles
Idiomas disponibles
Cleaning & Maintenance
Cleaning the air condenser
Let the dryer cool down.
Some water may come out, place a cloth or absorbent paper.
1.
Open the cover and the lid on the bottom of the tumble dryer.
2. Leave the cover fully open.
3. Insert the two locking levers.
4. Put the air condenser into water.
5. Clean the air condenser thoroughly and drain it well.
6. Clean and dry the gaskets.
7. Reinsert it.
8. Loosen the two locking levers.
9. Close the bottom cover until it clicks into position.
- Clean only with lukewarm water; do not use hard or sharp-edged objects in the dryer without the air
condenser!
- During drying, water may accumulate between the groove and the gasket, but this does not affect the
operation of the dryer.
Drum cleaning
•
Disconnect the power cord before cleaning.
•
Clean the dryer with a damp cloth that is moistened with clean water only.
•
Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaners. They may damage
plastic surfaces and other parts.
•
Use gloves for cleaning.
•
Prepare a damp cloth dampened with clean water.
•
Clean the door, especially the inner window.
•
Clean the seal around the door opening.
•
Clean the humidity sensor inside the drum.
•
Remove all filters, clean the seal and air flow openings.
•
Before starting the dryer, dry all parts with a soft cloth.
43
English
infiniton.es
Publicidad
