Setup The Camera - Usogood TC30 Manual Del Usuario

EN

5. Setup the Camera

1. Insert 8 brand new 1.5V AA batteries
2. Insert the formatted SD card
3. Switch to TEST mode
4. Press MENU to set parameters
5. Place the camera on a suitable placement
6. Switch to ON mode
7. The camera works after 5s countdown
Note: After 5s countdown, the screen will turn black. At this time,
please wait another 30s to activate the internal analog circuit,
during this time the camera does not take pictures.
Scan the QR code to learn how to operate the camera
12