Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Time lapse
Turning on Time lapse, the camera takes photos at regular intervals
and automatically creates a video file. Please note that the Target
recording time function should be turned off at this time.
PIR Interval
After the selected interval, only when the animal enters the
detection range, the camera will be triggered and take a picture.
Shorter intervals and higher camera frequency will consume power
faster.
Switch to 'ON' mode then wait for the 5 seconds countdown to
enter the working mode. If you can take pictures or record videos
normally with this setting, the camera is working properly.
Note: The camera will experience a PIR interval (depends on your
settings) when it just enters the working mode, it will not take a
photo during this time.
8. Technical
Sensor
Lens
IR LED
Trigger Speed
PIR Detection Range
PIR Trigger Distance
CMOS, 24MP
F=2.5 f=8.7mm FOV=90°
850NM /36pcs
0.3s
120°
0 - 18m
14
Publicidad
