Braun ThermoScan 6 Manual De Instrucciones página 9

How to change temperature between °C and °F
Your Braun ThermoScan is shipped with the Fahrenheit (°F) temperature scale
activated . If you wish to switch to Celsius (°C) and/or back from Celsius to
Fahrenheit, proceed as follows:
1 . Make sure the thermometer is turned off .
2 . Press and hold down the Power button
will show this sequence: °F / SET / °C / SET .
3 . Release the Power button when the desired temperature scale is shown .
There will be a short beep to confirm the new setting, then the thermometer is
turned off automatically .
Care and cleaning
The probe tip is the most delicate part of the thermometer . It must be clean and
intact to ensure accurate readings . If the thermometer is ever accidentally used
without a hygienic lens filter, clean the probe tip as follows:
Very gently wipe the surface with a cotton swab or soft cloth moistened with
alcohol . After the alcohol has completely dried out, you can put a new hygienic
lens filter on and take a temperature measurement .
If the probe tip is damaged, please contact Consumer Relations .
Use a soft, dry cloth to clean the thermometer display and exterior . DO NOT use abrasive cleaners . NEVER
submerge this thermometer in water or any other liquid . Store thermometer and hygienic lens filters in a dry
location free from dust and contamination and away from direct sunlight .
Additional hygienic lens filters (LF 40) are available at most stores carrying Braun ThermoScan .
Replacing the batteries
The thermometer is supplied with two 1 .5 V type AA (LR 06) batteries .
1 . Insert new batteries when the battery symbol appears on the display .
2 . Open the battery compartment . Remove the batteries and replace with new
batteries, making sure the poles are in the right direction .
3 . Snap battery door into place .
Only discard empty batteries . To protect the environment, dispose of empty
batteries at your retail store or at appropriate collection sites according to national
or local regulations .
Do not mix alkaline, standard, or rechargeable batteries .
Calibration
The thermometer is initially calibrated at the time of manufacture . If this thermometer is used according to
the use instructions, periodic re-adjustment is not required . If at any time you question the accuracy, please
contact Consumer Relations .
. After about 3 seconds the display
English
7