Specific Safety Rules; Important Safety Instructions - Makita 8271D Manual De Instrucciones

ENGLISH
1 Button
2 Battery cartridge
3 Switch trigger
4 Reversing switch lever
5 Low speed
6 High speed
SPECIFICATIONS
Modelo
Capacities
No load speed
-1
(min )
Blows per minute
Overall length
Net weight
Rated voltage
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for impact drilling in brick, concrete
and stone as well as for drilling without impact in wood,
metal, ceramic and plastic.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to hammer drill safety rules. If you use this power
tool unsafely or incorrectly, you can suffer serious
personal injury.
1. Wear ear protectors with impact drills. Exposure
to noise can cause hearing loss.
2. Hold power tools by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a "live" wire will make exposed metal
parts of the tool "live" and shock the operator.
3. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
4. Hold the tool firmly with both hands.
5. Keep hands away from moving parts.
4
Explanation of general view
7 Speed change lever
8 Action mode changing ring
9 Arrow
10 Graduations
11 Adjusting ring
12 Pointer
Steel
Wood
Concrete
Wood screw
Machine screw
High
Low
High
Low
GEB011-2
8271D 8281D
10 mm 10 mm
25 mm 25 mm
8 mm 10 mm
5.1 mm x 63 mm
210 mm 210 mm
1.6 kg 1.7 kg
D.C. 12 V D.C. 14.4 V
6. Do not leave the tool running. Operate the tool
only when hand-held.
7. Do not touch the bit or the workpiece immedi-
ately after operation; they may be extremely hot
and could burn your skin.
8. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation
and skin contact. Follow material supplier safety
data.
SAVE THESE INSTRUCTIONS.
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.

IMPORTANT SAFETY INSTRUCTIONS

FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
13 Sleeve
14 Ring
15 Tighten
16 Blow-out bulb
8381D
13 mm
25 mm
10 mm
6 mm x 75 mm
6 mm
0 – 1,300
0 – 400
0 – 19,500
0 – 6,000
218 mm
1.7 kg
D.C. 14.4 V D.C. 18 V
8391D
13 mm
36 mm
13 mm
234 mm
2.3 kg
ENC004-1