Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Power Connectors
Parallel
+12V
3
1
Ground
Ground
Use a power supply that complies with the ATX12V Power Supply Design Guide
Version 1.1. An ATX12V power supply unit has a standard 24-pin ATX main power
connector that must be inserted into the 24-pin connector. The 4-pin +12V power
connector enables the delivery of more +12VDC current to the processor's Volt-
age Regulator Module (VRM).
The power connectors from the power supply unit are designed to fit the 24-pin
and 4-pin connectors in only one orientation. Make sure to find the proper orien-
tation before plugging the connectors.
The system board requires a minimum of 300 Watt power supply to operate. Your
system configuration (CPU power, amount of memory, add-in cards, peripherals,
etc.) may exceed the minimum power requirement. To ensure that adequate
power is provided, we strongly recommend that you use a minimum of 400 Watt
(or greater) power supply.
Important:
Insufficient power supplied to the system may result in instability or
the add-in boards and peripherals not functioning properly. Calculating
the system's approximate power usage is important to ensure that the
power supply meets the system's consumption requirements.
+12V
4
12V power
2
English
12 24
COM
+3.3VDC
+5VDC
+12VDC
+5VDC
+12VDC
+5VDC
+5VSB
NC
PWR_OK
COM
COM
COM
+5VDC
COM
COM
PS_ON#
+5VDC
COM
COM
+3.3VDC
-12VDC
+3.3VDC
+3.3VDC
1
13
ATX power
E
21
Publicidad
