Case IH BC2314EN Manual Del Operador página 10

ASSEMBLY INSTRUCTIONS
11
*I
1
Extension Lance Installation
While spray gun (K) is in the locked position, insert
lance (*I) into the end of spray gun by inserting and
turning clockwise until fully in place. To remove, turn
counterclockwise.
13
E
*C
To remove nozzle (E) and Rotary nozzle (*C), pull
back on collar of lance (*I) and pull out nozzle.
10
K
*I
1
12
E
*C
Attach nozzle (E) and Rotary nozzle (*C) into end of
lance (*I) by pressing selected nozzle into place. It
will make a "click" sound when firmly in place.
Note: Always push safety lock button to lock trigger
when changing lances and nozzles to ensure that
they do not accidentally eject with force during
removal.
14
O
Foam Cannon Installation
The foam cannon (O) comes with a straw which is
fitted into high pressure top. If you do not see the
straw, look inside the foam cannon and attach it to
the high pressure top. When using foam cannon,
fill it with a properly formulated detergent or cleaner
with a water ratio according to instructions on the
container.
• DO NOT use thick or gel-like detergents as they will
clog the foam cannon and can cause damage.
cih.cnhpowerequipment.com
*I
2
1
750ml
600ml
450ml
300ml
150ml