Case IH BC2314EN Manual Del Operador página 16

CARE AND MAINTENANCE
could become contaminated, and can cause the detergent
injector to clog and not function properly. Flush the tank and
nozzle head with clear water to prevent clogging.
• Wind the power cord around the L-shaped hooks located on the
top of the machine.
• The pressure hose is stored on the hose hook located on the
back of the handle.
PUMP SAVER
Pump Saver is a product that protects and prolongs the life of the
pump. This will keep the internal parts of the pump lubricated and
protected from freezing while being stored in ALL climates. It also
assists with protection from internal corrosion. The Case IH part
number is: BCNH490046. Purchase at a Case IH retailer near
you.
Pump Saver Instructions
Follow the previous storage instructions for your power
To prevent staining, protect the surface under the power washer
from any excess fluid. wear ear and eye protection when using
this product.
Turn unit off and disconnect the gun before adding pump saver.
Unscrew threaded top from bottle to remove seal and reattach
threaded top to bottle.
Remove black cap from bottle.
1) Place top of pump saver bottle onto the garden hose
adapter.
2) Secure pump saver bottle by turning in a lockwise
direction.
16
• The quick connect nozzles and rotary nozzle are stored on the
nozzle holder located on both sides of machine.
• DO NOT store the power washer where it is exposed to freezing
temperatures unless you use an antifreeze designed for pumps.
Store the power washer indoors to prevent the water in the
unit from expanding under freezing conditions. When the water
freezes and expands, your power washer will be damaged and
become inoperable. Or, if storing outdoors, it is recommended
you use pump saver (not included) to protect pumps.
3) Turn the power on.
4) Squeeze bottle to help it into the pump.
5) Turn power off when pump saver exits the machine's water
outlet.
Note: Instructions on Pump Saver Bottle are generic and not
model specific.
cih.cnhpowerequipment.com