brennenstuhl ELH 21 Manual De Instrucciones página 6

Jet-Light ELH 21 / ELH 38
Introduction
Please read these operating instructions carefully and completely before use. They are
part of your product and contain important information concerning its operation and
handling. All precautions are to be observed when using this product. Check that the
voltage is correct before starting. If you have any questions or want to clarify some
uncertainties, please contact your dealer or service center. Please retain these
instructions and pass them on to third parties if necessary.
Intended use
This splash-proof work lamp is suitable for both interior and exterior use. With its power
cord with plug, it is ready for connection. The polycarbonate cover is impact-resistant.
The lamp can be installed and placed onto all normally inflammable surfaces. Due to the
socket outlets on its backside, it can be used as a power distribution. Any other use than
the above mentioned or any modification is not permitted and can result in damages.
In addition it can lead to further perilous risks and injuries as well as to technical
malfunctions (such as short circuits, fire, electric shock, etc.).
Package contents
Immediately after unpacking, the package contents must be checked for completeness.
Furthermore, check the unit itself for proper condition.
1 Flat lamp, model ELH 21 or ELH 38 (see technical label on the lamp)
1 Operating Instructions
Technical data
Model:
Nominal voltage:
Illuminant:
Power input:
Protection rating:
Type of protection:
217mm
213mm
6
ELH 21
220-240 V~ 50 Hz
21 W, GR10q
approx. 1.8 m H05RN-F 3G1.0
I
IP54
75mm
94mm
Operating Instructions
ELH 38
220-240 V~ 50 Hz
38 W, GR10q
approx. 1.8 m H05RN-F 3G1.0
I
IP54
282mm
274mm
82,5mm
100mm