brennenstuhl ELH 21 Manual De Instrucciones página 8

Jet-Light ELH 21 / ELH 38
• Use a suitable Phillips screwdriver to remove the four screws at from the lamp cover.
• Carefully remove the lamp cover from the housing.
• Carefully remove the illuminant.
• Gently push the new illuminant into the lamp socket.
• Reattach the lamp cover to the housing.
• Fasten the four screws again.
Your lamp is ready for operation.
Maintenance and care
Important! The work lamp contains no parts that have to be serviced by the user.
Warning! Always disconnect the power plug from the mains prior to performing any kind
of work on the lamp.
Disregard can pose the risk of accident and / or injury.
Caution! For safety reasons the lamp must not be cleaned with water or other liquids.
Use only a clean, lint-free cloth to clean the lamp.
Do not use solvents, gasoline, etc., as this would damage the lamp.
Disposal
Do not dispose of electrical appliances in the regular household waste!
In accordance with European Directive 2002 / 96 / EG about the disposal of
electronic and electrical appliances and the realization under national law, electric
tools must be collected separately and have to be recycled in a nonpolluting manner.
Contact your municipal office for further information about recycling centers for your
disused appliance.
Declaration of Conformity and manufacturer
The CE-Symbol was applied in conformity with the applicable European Guidelines.
The Declaration of Conformity is filed with the manufacturer.
Manufacturer:
Hugo Brennenstuhl GmbH & Co. KG
72074 Tübingen · Germany
lectra-t
CH-6340 Baar
H. Brennenstuhl S.A.S.
F-67460 Souffelweyersheim
www.brennenstuhl.com
8
Operating Instructions