Publicidad
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
STEAM MOP
22
OPERATION
1. Riempimento del serbatoio dell'acqua
1. Filling the water tank
Method one:
Open the water tank cap 11 by counterclockwise rotation, fill 300ML water use
Measuring cup, and then clockwise rotation to close water tank cap 11.
Method two:
Remove the water tank from main body, open the water tank cap 11 by ounterclockwise
rotation, fill the water tank from water faucet., and then clockwise rotation to close
water tank cap 11.
Install the water tank 13 to main body until it clicks into place.
2. Plug in the appliance to a grounded outlet.
3. When switch the appliance on, the indicator lights will turn red on each side of
water tank, it indicates preheating. If the lights does not illuminate, please check the
"troubleshooting" section for more details.
4. It will take approximately 20 seconds for preheating. Once the steam mop is ready
to use, the water tank will glow blue, the mop will emit the steam automatically
5.When the water tank full fill with water, it can work approximately 20 minutes.
NOTICE: If power off during preheating or after preheating, then power again, the
appliance will repeat above preheating action.
6. Add control volume by turn steam control knob
10 clockwise, and counterclockwise to reduce, user
can adjust steam volume according to different
purpose
Publicidad
