Kasanova JIH000002 Manual De Instrucciones página 25

All manuals and user guides at all-guides.com
STEAM MOP
25
CLEANING AND MAINTENANCE
BE SURE THAT THE UNIT IS DISCONNECTED FROM THE POWER OUTLET WHEN
PERFORMING CLEANING
Drain the remaining water in the tank and clean the tank after every use.
Please use detergent to clean the accessories (Jet Nozzle and Round Brush) when
they are dirty then wash with cleaning water and air dry
How to decalcify the Water Tank interior
To clean calcium deposits that build up inside the Water Tank, add one or two
tablespoons of white vinegar to a full Water Tank close the Water Tank Cap and then
shake the contents. DO NOT TURN THE STEAMER ON.
Cleaning procedure to remove lime scale
If your steam mop begins to produce steam more slowly than usual or stops producing
steam, you may need to remove lime scale. Lime scale can develop over time on the
metal parts and greatly affect mop performance.
It is necessary to remove lime scale on regular basis every 25-50 times you use a full
tank of water or at least once a month, especially in areas with hard water.
The frequency of lime scale removal depends upon the hardness of your tap water and
how often you use the steam mop.
La frequenza della rimozione del calcare dipende dalla durezza dell'acqua del rubinetto
e dalla frequenza con cui si usa la scopa a vapore.
By using cleaning solution
1. Prepare a solution of 1/3 white vinegar and 2/3 tap water and add to the water tank.
2. Secure and position the unit to ensure steam released is aimed away from the floor
or surrounding objects and surface. Plug the unit in, turn the unit ON by pressing the
power switch, and allow the unit to produce steam until the vinegar/water solution is
used up.
3. Repeat the above procedure as many times as necessary until a normal steam flow
rate is achieved.
4. Fill the water tank with fresh water and rinse out.
5. Fill the water tank with fresh water, attach to the unit and release steam through the
system until the water tank is empty.