Publicidad
Idiomas disponibles
Idiomas disponibles
IV. OPERATION OF WINE COOLER
Your wine cooler has an electric temperature control on the front of the unit. You may program
of your wine cooler at any setting you desire. The temperature range varies from 11 to 18
degrees. When initially turned on, the display will show the ambient temperature and then the
internal cabinet temperature. The zone temperature may have a difference of 3 (5 ) from setting
depending on loading and ambient conditions. It is recommended you install the wine cooler in
a place where the ambient temperature is between 23º-26ºC/72º-78ºF. If the ambient
temperature is outside this range, the performance of the unit may be affected. Placing your unit
in extreme cold or hot conditions may cause interior temperatures fluctuation.
Recommended temperatures for chilling wine:
Red wines: 14-18°C/57-65°F
White wines: 9-14°C/49-58°F
Rosé wines: 10-11°C/51-53°F
HANDLE INSTALLATION
To install the door handle follow the below steps:
1. Open the door of the appliance and move the door
gasket slightly to one side so that you can see two
designated holes for handle installation
2. Install the handle tightly as shown in the diagram above with the two screws provided.
3. Ensure the door gasket falls back into place and that the door opens and closes correctly.
ELECTRONIC CONTROL
Publicidad
