Publicidad
Idiomas disponibles
Idiomas disponibles
9.6
Cautions
1.
The induction hotplate must be installed by qualified personnel or technicians. We have professionals at
your service. Please never conduct the operation by yourself.
2.
The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine or clothes
dryer, as the humidity may damage the hob electronics
3.
The induction hotplate shall be installed such that better heat radiation can be ensured to enhance its
reliability.
4.
The wall and induced heating zone above the table surface shall withstand heat.
5.
To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6.
A steam cleaner is not to be used.
9.7
Connecting the hob to the mains power supply
This hob must be connected to the mains power supply only by a suitably qualified person. Before
connecting the hob to the mains power supply, check that:
1.
The domestic wiring system is suitable for the power drawn by the hob.
2.
The voltage corresponds to the value given in the rating plate
3.
The power supply cable sections can withstand the load specified on the rating plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or branching
devices, as they can cause overheating and fire.
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75˚C at any point.
Check with an electrician whether the domestic wiring system is suitable without alterations. Any
alterations must only be made by a qualified electrician.
If the total number of heating unit of the appliance you choose is not less than 4, the appliance
can be connected directly to the mains by single-phase electric connection, as shown below.
29
Publicidad
