Publicidad
Idiomas disponibles
Idiomas disponibles
Power Output
Wh
2 to 3 digit number
USB DEVICE CONNECTION
PRECAUTIONS (UC18YSL3)
When an unexpected problem occurs, the data in a USB
device connected to this product may be corrupted or lost.
Always make sure to back up any data contained in the USB
device prior to use with this product.
Please be aware that our company accepts absolutely no
responsibility for any data stored in a USB device that is
corrupted or lost, nor for any damage that may occur to a
connected device.
WARNING
○ Prior to use, check the connecting USB cable for any
defect or damage.
Using a defective or damaged USB cable can cause
smoke emission or ignition.
○ When the product is not being used, cover the USB port
with the rubber cover.
Buildup of dust etc. in the USB port can cause smoke
emission or ignition.
NOTE
○ There may be an occasional pause during USB
recharging.
○ When a USB device is not being charged, remove the
USB device from the charger.
Failure to do so may not only reduce the battery life
of a USB device, but may also result in unexpected
accidents.
○ It may not be possible to charge some USB devices,
depending on the type of device.
NAMES OF PARTS (Fig. 1 – Fig. 13)
Rubber shield
Shaft (A2) (Material: Plain bar steel)
Screw (A5) (Material: Plain steel)
Hex nut (M14)
Holder (M14) (Material: Plain steel)
Side handle
Battery
Battery cover
Switch trigger
Switch stopper
Lock-off button
Motor
Name plate
Shift lever
Charge indicator lamp
Battery level indicator switch
Battery level indicator lamp
Arrow
Double-ended wrench (17, 22 mm)
Double-ended wrench (17, 19 mm)
Latch
Rubber cover
USB port
USB cable
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
UM36DA: Cordless Mixer
To reduce the risk of injury, user must read
instruction manual.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2012/19/EU
on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
Direct current
V
Rated voltage
n
No-load speed
0
Switching ON
Switching OFF
Lock
Switch locks to the "ON" position.
Disconnect the battery
Lock
Unlock
Change rotation speed - Low speed
Change rotation speed - High speed
Warning
Prohibited action
9
English
Publicidad
