SUHNER ABRASIVE LWC 13 Documentación Técnica página 19

Ocultar thumbs Ver también para LWC 13:

Idiomas disponibles

4. S

ERvICE

4.1 P

reVentiVe mAintenAnce

Without a tool clamped in check no-load

speed periodically and after each mainte-

nance. Even if the machine still operates

perfectly, the motor should be removed, cleaned and the

four slides checked for wear by a specialist after approx.

300 to 400 operating hours.

4.1.1 r

ePlAcement of the exhAust Air hose

Detach hose clamp and remove from plastic housing to-

gether with exhaust hose. Slide new exhaust hose with

hose clamps up to the stop over onto plastic housing. Af-

fix exhaust hose with hose clamp so that the vent hose is

not arched.

4.1.2 r

ePlAcement of the suPPly hose

Remove the exhaust air hose (see 4.1.1).

Loosen hose clamp. Remove supply and power hose with

insulation from connection nipple. Slide new supply and

power hose with silencer together with the hose clamp

over onto the connection nipple and fix in place.

/ m

aINTENaNCE