Autoadapt Turny Evo Manual De Instalación página 34

34
Turny Evo Getting seated
9. Exit the emergency operation menu
When the installation has finished the Turny Evo should be again put into normal
operating mode. To return to normal operating mode the criteria in paragraphs 9.1
and 9.2 must be met.
9.1
Swivel the seat in
The seat must be lifted all the way up and swivelled all the way in. Switch between
movements and directions until the "up" and "in" symbols have greyed out. Note
that the symbol for "in" is laterally inverse in a left-side Turny Evo.
Select movement
Activate direction
9.2
Exit the emergency operation menu
The seat must back over the starting position for the programming. A clicking
sound can be heard when the seat passes over this position.
Lengthwise
1
2
3
Lift Swivel
Up In
Press 1 or 3 and select "lengthwise". Run the seat to the specified starting position
by pressing 2 or 4 for "forwards" or "backwards".
Press 4 for "backwards". Run the seat backwards until the "exit" symbol lights up.
If the seat stops before "exit" lights up you can override the system by forcing the
seat backwards by holding in button 4 for "backwards" for four seconds. If the
"exit" does not light up step 2 may have to be repeated.
Starting position /
Exit
Press 1 or 3 and select "exit".
Press 2 to confirm "exit". Turny Evo is now back in its normal operating mode.
If this screen is displayed the criteria to exit the system has not been achieved.
Go back and do 9.1 again and then step 9.2.
Press 1 or 3 to select the main menu at the top.
Lengthwise
Run backwards