Publicidad
Idiomas disponibles
Idiomas disponibles
8
Installing your new appliance
Before using the appliance for the first
time, you should be informed of the
following tips.
Warning!
For proper installation, this refrigerator
must be placed on a level surface of hard
material that is the same height as the rest
of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
The rollers, which are not castors, should
be only used for forward or backward
movement.
Moving
sideways may damage your floor and the
rollers.
Ventilation of appliance
Install the appliance in a plane
and
stable
good ventilation.
We recommend letting a space at least:
-
50-70mm from the back to the wall
-
100mm from the top to the wall
-
100mm from its side to the wall
Enough space must be provided in the
front of the appliance to allow the doors to
open as shown in follow diagrams.
the
refrigerator
surface. Assure
Note:
This appliance performs well from N to ST.
The appliance may not work properly if it is left for
a longer period at a temperature above or below
the indicated range.
Climate class
Ambient temperature
SN
+10°C to +32°C
N
+16°C to +32°C
ST
+16°C to +38°C
T
+16°C to +43°C
Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct sunlight,
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.
Leveling of appliance
For sufficient leveling and air circulating
in the lower rear section of the appliance,
Publicidad
