Power Dynamics 952.502 Manual De Instrucciones página 3

UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
On the label on the backside of the product is indicated on this type of power supply must be connected. Check that the mains
voltage corresponds to this, all other voltages than specified, the light effect can be irreparably damaged. The product must also
be directly connected to the mains and may be used. No dimmer or adjustable power supply.
Always connect the device to a protected circuit (fuse).
INSTALLATION
1. Connect your speakers correctly with the speaker output terminal of the WT10 Wifi amplifier module.
For the left speaker, make sure to connect with the right two slots (marked "L") of the output terminal. For the right
speaker, the left two slots (marked "R") should be used.
2. Besides streaming your content via Wifi, it is also possible to connect your music source via auxiliary input (A) with the
supplied AUX cable or via USB (B).
3. Use the supplied 15V power adapter to power the module.
4. Download the free Legacy Player app from the App Store or Play Store and connect your music device by following the
direct instructions from there. Here you will also find the latest features and explanations on how to use them.
3