Fellowes AeraMax-190 Manual De Instrucciones página 10

4. Place the new filters in the main unit.
(Carbon Filter should always be
inserted first, then the True HEPA filter
into drawer.)
5. To reset the filter light once a new True
HEPA and/or Carbon Filter is installed:
a. Be sure that drawer is closed.
b. Turn on the unit.
c. Locate the filter replacement icon on
the display panel.
d. Press and hold the filter replacement
icon for 3 seconds until unit beeps.
HEPA Filter icon will flash amber.
Press filter icon area to alternate
between HEPA and Carbon.
e. Once desired filter is illuminated, press
and hold for 3-5 seconds. A short beep
will be heard and the light should turn
off. Repeat process for each filter as
needed.
10 10