Wilo Star-RS Serie Instrucciones De Instalación Y Funcionamiento página 17

English
3 Transport and interim storage
Immediately after receiving the product:
• Check the product for damage in transit
• In the event of damage in transit, take the necessary steps with
the forwarding agent within the respective time limits.
CAUTION! Risk of damage to property!
Incorrect transport and interim storage can cause damage to
the product (Fig. 7).
• The pump should be protected from moisture, frost and
mechanical damage due to impact during transport and
interim storage.
• The pump must not be exposed to temperatures outside the
range of -10 °C to +50 °C.
4 Intended use
The circulation pumps in the Wilo-Star RS series are designed
for hot-water heating systems and similar systems with con-
stantly changing volume flows.
Approved fluids are heating water in accordance with VDI 2035,
water/glycol mixture at a mixing ratio of max. 1:1. If glycol is
added, the delivery data of the pump must be corrected
according to the higher viscosity, depending on the mixing ratio
percentage.
Only use brand-name goods with corrosion protection inhibi-
tors and observe the manufacturer's specifications.WILO's
approval is necessary for the use of other fluids.
Intended use also includes following these instructions.
Any other use is not regarded as intended use.
8 WILO SE 03/2015