Type Key; Scope Of Delivery; Accessories; Transport And Storage - Wilo Rexa CUT GI Instrucciones De Instalación Y Funcionamiento

en-US
4.7

Type key

4.8

Scope of delivery

4.9

Accessories

5

Transport and storage

5.1

Delivery

5.2

Transport

14
Transport and storage
Example: Wilo-Rexa CUT GI03.30/S-M15-2-623
Series
CUT
Grinder pump with internal macerator
GI
Nominal diameter of pressure connection: DN 32
03
Max. delivery head in m
30
Surface-cooled motor with stainless steel housing
S
Mains connection version: M = 1~, T = 3~
M
/10 = rated power P
15
Number of poles
2
Frequency mains connection: 5 = 50 Hz, 6 = 60 Hz
6
Key for rated voltage
23
▪ Pump
▪ Cable with bare end
▪ Installation and operating instructions
▪ Guide system
▪ Pump foot
▪ External pencil electrode for sealing chamber control
▪ Level controls
▪ Fixing accessories and chains
▪ Switchgears, relays, and plugs
Following receipt of the shipment the shipment must be immediately checked for defects
(damage, completeness). Any existing defects must be noted on the freight documentation!
Furthermore, the defects must be reported to the transport company or manufacturer on
the date of receipt. Claims reported after this date can no longer be invoked.
WARNING
Standing under suspended loads!
People must not stand under suspended loads! There is a risk of (serious) injury due to
falling parts. The load must not be moved over the work areas in which people are
present!
WARNING
Head and foot injuries due to a lack of protective equipment!
During work there is a risk of (serious) injury. Wear the following protective equipment:
• Safety shoes
• If lifting equipment is used, a protective helmet must also be worn.
in kW
2
WILO SE 2019-02