Manhattan 180924 Instrucciones página 4

Setup
1 Unlock unit door and open it.
2 Fitting a larger device — To remove an appropriate slot divider, push it to the back of the cabinet and lift it out. To
replace a divider, position its tab(s) into the appropriate slot(s) and pull it toward you.
3 Connect devices to power outlets with appropriate cables. Secure cables with wire clips on dividers.
• Remove screws that hold the power box in place; slide the power box out.
• Connect power cables to power outlets, feeding cables through holes on power panel.
• Push the power box back in and replace the screws that hold it in place.
• Load devices in bays.
• Connect cables to devices.
Charging
4 Connect unit power cable to power outlet. Unit automatically begins to charge devices.
4 English
1
2
1
Instructions
3