Adjusting The Level Of The Reverb Effect; Adjusting The Level Of The Delay Effect; Adjusting The Harmony Effect; Matching The Harmony To The Key Of Your Song - Boss Vocal PERFORMER VE-20 Manual De Instrucciones

Adjusting the level of the
Reverb effect
1.
Press the REVERB LEVEL button.
2.
Turn the SOUND knob to adjust the amount
of reverb as desired.
3.
Press the EXIT button to return to the Play
screen.
* If you want to turn off the reverb effect, set RevLevel to 0.
Additional reverb parameters can also be adjusted.
See "Editing the effects" (p. 12)
Adjusting the level of the
Delay effect
1.
Use the cursor buttons to select DlyLevel.
2.
Turn the SOUND knob to adjust the delay
level as desired.
3.
Press the EXIT button to return to the Play
screen.
* If you want to turn off the delay effect, set DlyLevel to 0.
Additional delay parameters can also be adjusted.
See "Editing the effects" (p. 12)

Adjusting the Harmony effect

Matching the harmony to the key of
your song
1.
Use the cursor buttons to select the Key .
2.
Turn the SOUND knob to set the Key to
match the key of your song.
The key setting corresponds to the key of the song (#,
b) as follows.
3.
Press the EXIT button to return to the Play
screen.

Adjusting the volume of the harmony

The VE-20 lets you layer two parts of harmony (Part
1 and Part 2) onto your own voice.
1.
Use the cursor buttons to select Part1Lev.
2.
Turn the SOUND knob to adjust the volume
as desired.
3.
Adjust the Part2Lev in the same way.
4.
Press the EXIT button to return to the Play
screen.
* If you want to add only one harmony part, set the
unneeded part's level to 0.
Additional harmony parameters can also be
adjusted. See "Editing the effects" (p. 12)
Sounds and Effects
11