Descargar Imprimir esta página

Nexgrill 720-0925W Manual De Instrucciones página 10

Ocultar thumbs Ver también para 720-0925W:

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTIONS
Place dust cap on cylinder valve outlet when the
cylinder is not in use. Only install the type of dust
cap on the cylinder valve outlet that is provided with
the cylinder valve. Other types of caps or plugs may
result in leakage of gas.
The gas must be turned off at the supply cylinder
when the unit is not in use.
If the appliance is stored indoors the cylinder must
be disconnected and removed from the appliance.
Cylinders must be stored outdoors in a well-
ventilated area out of the reach of children.
Keep a spray bottle of soapy water near the gas
supply valve and check the connections before
each use.
Do not attempt to light the grill if odor of gas is
present. Call for service 0800-051-8916 (UK), 0800-
908-612 (FR), 800-7601 (IC), or 900-974-968 (SP).
Note: Remove all packaging, including straps, before using the grill.
Each burner is adjusted prior to shipment; however,
variations in the local gas supply may make minor
adjustments necessary.
Match Light
1. If the burner will not light after several attempts
then the burner can be match lit, before using the
match allow 5 minutes for any accumulated gas to
dissipate.
2. Clip a match on one end of the lighting rod.
3. Light match.
4. Hold lighting rod and insert lighted match right
next to the burner ports or ceramic file.
5. Push and turn the designated control knob to
6. Burner should ignite immediately.
Main Burner
Control Knob, Label
10
Component Identification
Side Burner
.

Publicidad

loading