Venga RVC 3001 BK Manual Del Usuario página 9

QUICK START
Connect the round plug to the adapter. To change the plug, press the release button and
turn the plug counterclockwise.
Plug in the charging dock, and place the remaining
excess cable into the cable storage space at the bottom
of charging dock.
Note: if you don't put the excess cable into the
storage space, it may get tangled with the robot while
charging or cleaning.
Charging dock position
Place the charging dock on a hard, level
surface and against a wall.
Make sure the area around the charging dock
is open and uncluttered, leaving at least:
• 2 m / 6 ft in front.
• 1 m / 3 ft on both sides.
Install the charging dock in a location
that your Venga! robot can easily access.
Always keep the charging dock plugged in.
ENGLISH
EN
VG RVC 3001 - 9