With this function the average number
of strokes per minute will be shown
every 4 seconds.
D. COUNT FUNCTION
count).-
This function shows the total number
of strokes between 1 and 999.
Pressing the
START/STOP
than two seconds will reset all of the
.
values
1. Press any key to switch the monitor
on.
2. By pressing the MODE key the
small COUNT window (total number of
strokes) will start flashing.
3. Select the strokes by pressing the
UP/DOWN keys.
4. Begin the exercise and the number
of strokes will start to count down.
When the countdown reaches zero it
will beep for 8 seconds to indicate that
the
selected
completed. The number of strokes will
now start to count upwards.
By using this function you can also
gauge the approximate distance you
have
travelled
exercise.
Taking a light rowing boat as an
example,
the
rowed
is
between
depending on the power and length of
the stroke.
E. CALORIE FUNCTION.-
This function counts up or down in
steps of one calorie, up to a maximum
of 999 calories.
Pressing the START/STOP key for
more than two seconds will reset all of
the values.
(stroke
key for more
number
has
while
doing
simulated
distance
8
to
12
1. Press any key to switch the monitor
on.
2. Press the MODE key to start the
small
flashing.
3. Press the UP/DOW N keys to select
the calories.
4. Begin the exercise and the calorie
value will begin the countdown, when
it reaches zero it will beep for 8
seconds,
selected
reached, the calorie value will then
start counting upward.
MANUAL FUNCTION.-
Press the START/STOP key to switch
the monitor on, the words MANUAL
will appear on the screen.
been
the
m,
Use the UP/DOWN keys to increase
or decrease the exertion level, there
are 8 exertion levels.
8
CAL
(CALORIE)
advising
you
calorie
value
window
that
the
has
been