EDM Product 33945 Manual De Instrucciones página 12

FEATURES
ES ▶Power: 45W
▶Speeds: 3 levels
▶Fixed or oscillating position
PT
▶security grill
▶Blade diameter: 40cm
▶Heights: min.100 - max.120cm
EN
▶Oscillating
FAN PARTS
1. Grid retaining ring
FR
2. Front of the grille
3. Propeller fixator
4. Propeller
5. Grid holder
6. Back of the grid
7. Engine
8. Dashboard
9. Oscillation regulator
10. Fixing screw
11. Telescopic top tube (chrome)
12. Fixing ring
13. Telescopic lower tube (white)
14. Cover
15. Foundation
Instruction manual
ASSEMBLY INSTRUCTIONS
1. Remove all packaging carefully, avoid scratching plastic
covers with scissors or knives.
2. Assemble the base of the fan, joining it to the lower
telescopic tube.
3. Place on the motor shaft following the following order: the
rear part of the grille, the propeller and the front part of the
grille using the corresponding nuts and washers to hold the
parts together as shown in the upper diagram.
4. To fix both grids use the ring, and fix it with the security
screw.
5. Finally insert the part of the propeller with the motor into
the telescopic tube and then use the fixing screw to hold it
all.
Ref. 33945