Adjusting the backlight
The backlight brightness can be adjusted to suit the lighting
conditions you are working in. Repeated quick clicks of the
Brightness button will step through the available settings. When you
have a level that suits simply stop clicking the brightness button.
This setting will be remembered and used in future.
Turning off the camera lights
If you wish to look at a backlit display (on a mobile phone or
computer display for instance), the camera lights can reduce the
image quality. You can turn the camera lights off by powering on the
Quicklook while holding in the Brightness button. To turn the lights
back on, simply turn the Quicklook off and back on again.
Battery Level
At start-up, the battery level is displayed in the corner of the screen
for 10 seconds. You can choose to display it constantly from the
Advanced Menu (see below). The battery icon changes colour
depending on the remaining capacity and will display in blue if the
unit is being recharged.
Using the Menu
The Quicklook Zoom has a menu system to allow you to customize
it to suit your requirements. To bring up the menu, press and hold
the Mode button for three seconds until an icon appears on the
screen. The contents of the menu will change depending on the
mode you are in; the Colour Mode Menu contains these options:
and the Reading Mode Menu contains these options:
Use Zoom-up and Zoom-down to navigate through the menu
choices and press Mode to accept the choice.
- 17 -