HAMPTON BAY MENA 92404 Guía De Uso Y Mantenimiento página 11

Assembly - Attaching the Light Kit
1
Installing the light kit pan
□
Remove one screw (QQ) from the black bracket below the fan
motor assembly (F), and loosen, but do not remove, the other
two screws (SS).
□
Push the light kit pan (G) up to the fan motor assembly (F) so
that the two loosened screw heads (SS) fit into the keyhole
slots. Turn the light kit pan (G) clockwise.
□
Re-install the screw (QQ) that was removed in the second
step.
□
Make sure all the screws are firmly tightened.
2
Attaching the LED module
□
Connect the wires from the LED module (H) to the wires from
the fan motor assembly (F) by connecting the molded adaptor
plugs together (black to blue, white to white). Carefully tuck all
wires and splices into the light kit pan (G).
□
Push the LED module (H) up to the light kit pan (G) so that the
two loosened screw heads fit into the keyhole slots. Turn the
LED module (H) clockwise to secure.
□
Re-install the screw (TT) that was removed in the first step.
□
Make sure all the screws are firmly tightened.
3
Installing the shade
WARNING: Do not overtighten when installing the shade into the
light kit. Allow the shade to cool completely before removing.
□
Place the shade (I) into the light kit pan (G), aligning the three
flat areas on the top of the flange of the shade (I) with the
three raised dimples in the light kit pan (G). Turn the shade
clockwise until it stops.
F
G
QQ
F
G
H
TT
EE
I
11
Please contact 1-855-HD-HAMPTON for further assistance.
SS
G
HAMPTONBAY.COM