Presentation; Description - Chauvin Arnoux F 01 Manual De Instrucciones

Reliability and simplicity are the key features of the F01
multimeter clamp for use by electricity professionals:
A compact instrument integrating a current sensor for
measuring intensity without switching off the power to the
circuit to be checked.
Exceptional ergonomic design which includes:
- automatic selection of the type of signal to be measured,
direct or alternating,
- automatic selection of the measurement calibration,
- programmable buzzer warning when voltage is present:
V-Live,
- buzzer warning when outside the measurement range,
- system to shut the instrument down automatically.
Compliance with IEC electrical safety standards and EC
marking
Light and robust for on and off-site use.
(see diagram in § 8 Appendix)
Jaws
4-way selector switch:
OFF The clamp is shut down, it is switched on when
one of the other functions is selected
V Measurement of direct and alternating voltage
(RMS value)
Measurement of continuity and resistance
~
A Measurement of alternating current (RMS value)
Control key
2 types of action are possible with this key:
Short press
< 1.3 s, it is valid as soon as key activation is detected.
Key held down
This enables access to secondary functions in conjunction
with the selector switch.
HOLD A short press on the key freezes the display. The
display is cleared when the key is pressed for the
second time.
HOLD key / selector switch combination
(see description § 3.5)
- Deactivation of the instrument's automatic shutdown
function.
- Activation of the V-Live function
- Display of the internal software version.

1. PRESENTATION

2. DESCRIPTION

16