Publicidad
1
Quick Setup Guide
1.3.13 LEDs
AGP Warning LED
The AGP slot supports 1.5V AGP add-in cards. If this type of AGP card is
used, the AGP Warning LED will not light. However, if no AGP card is
installed in the slot or you installed a +3.3V AGP card, the LED will light
indicating that a non-1.5V card was used.
DIMM Standby Power LED
This LED will turn red when the system's power is on or when it is in the
Suspend state (Power On Suspend or Suspend to RAM). It will not light
when the system is in the Soft-Off state.
PCI Standby Power LED
This LED will turn red when the system is in the power-on, Soft-Off or
Suspend (Power On Suspend or Suspend to RAM) state.
Important:
If the DIMM Standby Power LED or PCI Standby Power LED is
lighted, you must power-off the system then turn off the power
supply's switch or unplug the power cord prior to installing any
memory modules or add-in cards.
16
DIMM Standby
Power LED
AGP Warning LED
PCI Standby
Power LED
Publicidad
