Zbeamz PHANTOM 3000 PURE DIODE LASER RGB Manual Del Usuario página 28

A000-Axxx
AU01
S001
SCAN
COLO
SETA
SETB
SETC
SETD
YES
NO
DMX address setting
Auto running mode
Sound active mode
SC10 ~ SC40 (Press UP or DOWN to choose scanner
speed from 10K to 40K. Pls be careful on this setting as
it will destroy the scanner if it's set higher than the unit
scanner speed.)
CO01~CO12 (press UP or DOWN to choose colours)
(CO01~CO07 represents 7 single colour; CO08 is RGY;
CO09 is RBP, CO10 is GBC; CO11 is RGB; CO12 is WYCP)
ON (Always ON)
5S (ON for 5 seconds)
OFF (One beam protect OFF)
ON (One beam protect ON)
OFF
ON (Mater unit setting)
12 Channel
23 Channel
Default setting