Publicidad
Idiomas disponibles
Idiomas disponibles
The housing must never touch surrounding surfaces or objects.
Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
Always fix the fixture with an appropriate safety-rope.
The maximum ambient temperature T
= 45° C must never be exceeded.
a
Operate the device only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the device. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the device! Rather use a soft and damp cloth.
Please use the original packaging if the device is to be transported. Make sure that you pack the device in
the original state.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
DESCRIPTION OF THE DEVICE
Features
Halogen high output gobo mood projector
• DMX-controlled operation or stand alone operation with Master/Slave-function
• Gobo-wheel with 5 rotating glass gobos
• With gobo-shake function
• Manual focus
• Lightbeam with 20° or 25° radiation angle
• Electronic dimmer
• Sound-controlled via built-in microphone
• Microphone-sensitivity adjustable via rotary-control
• All settings via DIP switches
• 8 built-in programs can be called up via DMX-controller
• Blackout-socket
• Blackout applicable in Stand Alone mode via optional FUTURELIGHT Easy-1 remote control
• For EHJ 24 V/250 W G-6.35 lamp
• DMX-control via every standard DMX-controller
22/63
51837515_V_1_0.DOC
Publicidad
