Publicidad
Idiomas disponibles
Idiomas disponibles
2 INSTALLATION
Unpacking the machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the
washing machine
small triangle foam (a) is removed with the bottom packaging together.
If not, lay the unit down on the side surface and remove it manually.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Remove transport bolts
Warning!
• You must remove the transport bolts from the backside before using
the product.
Loosen the 4
transport bolts with
a spanner.
Warning!
• Packaging material (e.g. Films,
Styrofoam) can be dangerous for
a
children.
• There
all packaging well away from
children.
and remove the base packaging. Make sure the
Remove the bolts
including the rubber
parts and keep them
for future use.
13
is a risk of su ocation
Close the holes
using the cover
caps.
! Keep
Publicidad
