• Do not start the engine when standing in front of the
discharge chute.
• Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times.
• Never pick up or carry a lawn mower while the engine
is running.
• Stop the engine and disconnect the spark plug wire,
make sure that all moving parts have come to a
complete stop and, where a key is fitted remove the
key:
- Before clearing blockages or unclogging chute.
- Before checking, cleaning or working on the lawn
mower.
- After striking a foreign object. Inspect the lawn
mower for damage and make repairs before
restarting and operating the lawn mower.
- If lawn mower starts to vibrate abnormally (check
immediately).
• Stop the engine and disconnect the spark plug wire,
make sure that all moving parts have come to a
complete stop and, where a key is fitted remove the
key:
- Whenever you leave the lawn mower.
- Before refueling.
• Reduce the throttle setting during engine shut down
and, if the engine is provided with a shut-off valve, turn
the fuel off at the conclusion of mowing.
• Only use the lawn mower for the purpose for which it is
designed, for cutting and collecting grass. Any other
use can be hazardous, causing damage to the
machine.
Maintenance and storage
• Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition.
• Never store the equipment with petrol in the tank inside
a building where fumes can reach an open flame or
spark.
• Allow the engine to cool before storing in any
enclosure; Clean and maintain the lawn mower before
storage.
• To reduce the fire hazard, keep the engine, silencer,
battery compartment and petrol storage area free of
grass, leaves, or excessive grease.
4. TECHNICAL DATA
Model
Engine type
Self-Propelled
Engine Displacement
Nominal Power
Blade Width
Rated Speed
Fuel Tank Capacity
Oil Tank Capacity
Net Weight
Height adjustment
• Check the grass catcher frequently for wear or
deterioration.
• Replace worn or damaged parts for safety.
• If the fuel tank has to be drained, this should be done
outdoors.
• Improper maintenance, use of non-conforming
replacement components, or the removal or
modification of safety components can damage the
lawn mower and injure the operators seriously.
• Only use the recommended blades and spare parts by
the manufacturer. The use of non-genuine parts can
damage the machine and injure the operators. Keep
the lawn mower in good working condition.
• If the blade stopping device doesn't work, please
contact service center for help.
Transportation and handling
• Whenever the machine is to be handled, raised,
transported or tilted you must:
- wear strong working gloves;
- grasp the machine at the points that offer a safe grip,
taking account of the weight and its distribution;
- use an appropriate number of people for the weight
of the machine and the characteristics of the vehicle
or the place where it has to be placed or collected.
• During transport, fasten the machine securely with
ropes or chains.
the engine stopped.
3. PARTS DESCRIPTION (Fig. 1A
& 1B)
Including
A: Spark plug wrench
B: Side discharge channel
PM5120SR
B&S675EXi Series, ReadyStart
Yes
3
163 cm
2.6 kW
510 mm
2,800/min
1.0 L
0.47 L
31 kg
25-70 mm, 5 adjustment
WARNING: Do not touch rotating blade.
WARNING: Refuel in a well ventilated area with
B&S625E Series, ReadyStart
PM5120R
No
3
150 cm
2.2 kW
510 mm
2,800/min
0.8 L
0.47 L
25.5 kg
9