8.1 Adjusting the grinding
level
Set the desired grinding level while
the coffee beans are being ground.
WARNING
Risk of injury!
The grinder rotates.
Never reach into the grinder.
▶
ATTENTION!
Risk of damage to the grinder. The
grinder may be damaged if the grind-
ing level is not set properly.
Only set the grinding level when
▶
the grinder is running.
Select the grinding level using the
▶
rotary selector step by step.
Grinding level Setting
Fine grinding
level for lightly
roasted beans
Coarse grind-
ing level for
dark-roasted
beans
The grinding level setting only
takes effect after the second cup.
Tip: If the coffee is only dispensed
drop by drop, set a coarser grinding
level.
If the coffee is too thin with too little
crema, set a finer grinding level.
1
Depending on the appliance specifications
Turn rotary se-
lector anticlock-
wise.
Turn rotary se-
lector clockwise.
9 Cup heater
You can use the cup heater to pre-
heat your cups.
9.1 Activating and deactivat-
ing the cup heater
WARNING
Risk of burns!
1
The cup heater
hot.
Never touch the cup heater
▶
hot.
Allow the hot cup heater
▶
down before touching it.
Tip: Place the cups with their base
on the cup heater to warm them to
1
optimum effect
To activate or deactivate the cup
▶
1
heater
, press the
10 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
10.1 Changing the basic set-
tings
Press and hold buttons
1.
simultaneously for at
least 3 seconds.
Press
button
2.
peatedly until the display shows
the required setting.
Confirm with "ok" button
3.
Press the
button
4.
change the setting.
Cup heater en
1
1
can become very
1
1
to cool
.
button.
and
re-
.
while
to
49