Syncing Your Ipod Through The Turntable - Numark TTi Manual De Inicio Rápido Para El Usuario

SYNCING YOUR iPod THROUGH THE TURNTABLE

Your iPod can be synced to your iTunes right from the turntable. Follow the instructions below
to establish the connection.
1. Make sure that your turntable is connected to your computer, using the included USB
cable. (Windows users: If this is the first time that you are connecting the turntable, allow
your computer to automatically initialize the necessary hardware drivers. Proceed when
"Your New Hardware is Installed and Ready To Use" message appears on the bottom
corner of your computer screen screen.)
2. Press and hold the turntable's Menu button while inserting the iPod into the dock. When
your iPod connects to your computer, you will see "Do Not Disconnect" displayed on the
screen of your iPod. DO NOT REMOVE YOUR iPod FROM THE DOCK WHILE "DO
NOT DISCONNECT" IS DISPLAYED AND BEFORE PROPERLY EJECTING THE iPod
FROM YOUR COMPUTER!
DESTROY ITS CONTENTS!
3. Once your iPod is properly connected to your computer, iTunes should start automatically.
(PC users: if you have not yet installed iTunes, you can insert the CD included with the
turntable. Follow the on-screen instructions to install the application.)
4. If you have made any new recordings since the last time your iPod was connected to the
computer, you will see the following screen:
Select 'Yes' if you would like to
move the recordings (referred to
as voice memos) to your iTunes
library.
While your iPod is docked and synced to your computer, you can transfer music to and from it,
just as if it was connected directly to your computer.
Note that you can even listen to music from your computer through the turntable's RCA audio
output!
IMPORTANT: TO SAFELY DISCONNECT YOUR iPod FROM
YOUR COMPUTER, EJECT YOUR iPod BY CLICKING ON
THE EJECT BUTTON.
NOTE: When you eject your iPod from your computer, you will
need to remove and replace it in the dock if you wish to keep
using it with the TTi.
OTHERWISE YOU MAY DAMAGE YOUR iPod AND
10