Publicidad
Idiomas disponibles
Idiomas disponibles
Safety Instructions For Abrasive Cut-Off Machine
Safety is a combination of common sense, staying alert and knowing how your cut-off machine works. Read this man-
ual to understand this cut-off machine.
Safety Signal Words
DANGER: means if the safety information is not followed
someone will be seriously injured or killed.
Before Using This Tool
WARNING: To reduce the risk of mistakes that
could cause serious, permanent injury, do not plug
the saw in until the following steps have been sat-
isfactorily completed.
• Completely assemble and align tool. (See "Assembly"
and "Alignment" sections within.)
• Learn the use and function of the ON-OFF switch,
upper and lower blade guards, arbor lock, and work-
When Installing Or Moving This Tool
• Before moving this tool, chain the power head in the
lower position. Unplug the power cord.
• To reduce the risk of back injury, get help when you
need to lift the machine.
• Never carry the tool by the cord or power head trigger
handle. Damage to insulation could cause an electric
shock. Damage to wire connections could cause a fire.
Reduce The Risk of Dangerous Environment:
• Use the machine in a dry, indoor place protected from
rain.
• Keep work area well lighted.
WARNING: means if the safety information is not fol-
lowed someone could be seriously injured or killed.
CAUTION: means if the safety information is not followed
someone may be injured.
piece clamp. (See "Getting to Know Your Abrasive Cut-
Off Machine" section within.)
• Review and understand all safety instructions and
operating procedures in this manual.
• Review the maintenance methods for this tool. (See
"Maintenance" section within).
• Find and read the following labels on the cut-off
machine:
• Place the machine so neither the user nor bystanders
are forced to stand in line with the abrasive wheel.
Thrown debris could injure people in its path.
To reduce the risk of injury from unexpected
machine movement:
• Place the tool on a firm level surface where there is
plenty of room for handling and properly supporting the
workpiece.
• Support the tool so the table is level and does not rock.
• Secure the tool to its support if it tends to slip, walk, or
slide during use.
23
Publicidad
