Publicidad
Idiomas disponibles
Idiomas disponibles
How to use
English
Disable the Vacation function
Press the Function key to select Vacation until the corresponding icon flashes, then press the OK key for 5
seconds to confirm. If OK is not pressed within 5 seconds, the setting will be invalidated.
Exit Vacation function
In Vacation mode, press the Function key to select Vacation until the corresponding key flashes, and
then press the OK key to confirm. The Vacation function will be exited.
When the Smart or Fast Cooling function is enabled, the Vacation function will be disabled automatically.
Power off memory
In case of power failure, the refrigerator will maintain the operation status before the power failure when
the power supply is restored.
Delayed start
To prevent the refrigerator compressor from being damaged in the event of a short power failure (i.e.
less than 5 minutes), the compressor will not start immediately after switching on.
Overheating alarm (only after a power failure)
When the refrigerator system is on, if the freezer sensor temperature is above -10°C, the freezer zone
digits flash on the display. The freezer temperature can be displayed when any key is pressed, and the
display will be restored when any key is pressed again or after 10 seconds.
Door open alarm
If the refrigerator door is open for more than 3 minutes, a beep will sound continuously, which can be
stopped when any key is pressed, but will be reset after 3 minutes if the door is kept open. The alarms will
not be activated until the door is closed.
System fault alarm
If E0, E1, E2, EH or EC is shown on the display, it indicates a fault in the chiller. In this case, please contact
the service department for an appointment.
Adjusting the refrigerator's air regulation lever
The cold air entering the fresh food storage compartment will gradually increase as the air regulating
lever is adjusted from MIN. to MAX. position.
35
milectric.com
Publicidad
