One for All URC1211 Manual Del Usuario página 5

SETUP
SIMPLESET
If the brand of your device is shown in the SimpleSet picture pointing
to a key, you can use the SimpleSet system described in this section,
please locate the brand of your device and note the key associated
with it.
TV
Bush
Grundig
JVC
LG
Panasonic
Philips
Samsung
Sharp
Sony
Toshiba
To set up your device:
1.
Turn on your device (not on standby) and point the Essence
remote towards it.
2.
3.
4.
The remote will send Power every 3 seconds until your device
switches off.
5.
As soon as your device switches off, release the digit.
6.
The LED will blink twice and the remote should now operate
your device.
• If you find one or more keys do not work as you expect, start again at
step 2 – the remote will start with the next code in the memory.
Hold down the Setup key until the LED under the
Device key blinks twice.
Hold down the digit for your brand and device as
listed in the tables above - e.g. 7 for a Samsung TV.
5